Whirlpool Cabrio,- WED7300X Verwendung & Pflege Gude - Seite 5

Control Panel and Features

Not all features and cycles are available on all models.

STEAM MODEL

NON-STEAM MODEL

NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are

registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name

until the desired section is illuminated.

POWER BUTTON

Touch to turn the washer On. Touching once while the

washer is on will cancel the current cycle, touching twice

will turn the washer Off.

WHAT TO WASH/HOW TO WASH

First select a cycle from the "What to Wash" and then

select the "How to Wash" to get the best combination

cycle available for the type of items you are going to

wash. See "Cycle Guide" for cycle details.

START/PAUSE BUTTON

Touch and hold START/PAUSE to begin the selected cycle;

touch again to pause a cycle.

LED TIME/STATUS DISPLAY

The Estimated Time Remaining display shows the time

required for the cycle to complete. Factors such as load

size and water pressure may affect the time shown in

the display. Tightly packed loads, unbalanced loads, or

excessive suds may cause the washer to adjust the cycle

time, as well.

If you have set a delay start to the cycle, the Estimated

Time Remaining display will show the delay time adjusted.

When the cycle is complete, the Done indicator will light

until the lid is opened.

ADD GARMENT

When Add Garment is lit, you may pause the washer,

open the lid, and add items. Touch and hold START to

start the washer again.