Calandra Racing Concepts Carpet Knife Generation X Series Montageanleitung - Seite 14
Blättern Sie online oder laden Sie pdf Montageanleitung für Motorisiertes Spielzeugauto Calandra Racing Concepts Carpet Knife Generation X Series herunter. Calandra Racing Concepts Carpet Knife Generation X Series 18 Seiten.
Seite druckenBag 10
Adjust body height
by raising or
lowering this collar
103
83
28
Red Socket Cap
Bag 11
1 - Use the 4-40 x 3/8" red cap head screws [106] to bolt the rear wheels to the hubs.
(Tires not included)
2 - Insert the flanged bearings [108] into the front wheels. Place a 3/16" shim [107] over
the axle, then the front wheel, & then a red locknut [9] last. The front wheels should spin
very free. Do not over-tighten the front wheel nuts so that the bearings are pinched.
4-40 x 3/8"
Button Head
28
104
105
103
4-40 x 3/8"
3/16" Shim
107
106
9
107
108
4-40 x 1/8"
Set Screw
105
B
P
ODY
OSTS
1 - Secure the body posts [103] to the front bumper [83] and the
tweak plates [25] with the steel button head screws [28]. The tweak
plates have four body mount locations to accommodate numerous
body sizes and styles. Choose the hole that will work best with your
body.
2 - Thread the 1/8" set screw [105] into the plastic collars [104].
Adjust the collar up and down the body post to accommodate the
body shell used. Lock the collar with the set screw.
25
28
3/16" x 5/16"
Flanged Bearing
Red Locknut
9
108
Four rear body
mount locations
106
13