Backyard Living Structures PERGOLA Installationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installationshandbuch für Outdoor-Einrichtung Backyard Living Structures PERGOLA herunter. Backyard Living Structures PERGOLA 15 Seiten.

Seite drucken
HURRICANE CLIPS
OPTIONAL
These clips, when installed properly, dramatically increase your pergola's uplift resistance under extreme
wind loads. Refer to your warranty for more information regarding our residential lifetime wind warranty.
Clips are designed to be installed at each rafter to beam intersection in one of three ways:
1.
On the inside of the double beam (as shown in diagram, least visible)
2.
On top of the beam (works well when a post or column is in the way)
3.
On the outside of the beam (most visible, not recommended)
The screws provided are self-drilling. Along with the right angle drill attachment (provided
with hurricane clip kit), this makes installation on the inside of the beams easy.
a.
Hold the clip in the desired place, in between the beams and under the rafter.
b.
Install two screws into the underside of the rafter.
c.
Attach the right angle drill adaptor.
d.
Install one screw though the clip into the beam.
e.
Repeat at each rafter and beam intersection.
f.
Where a post or other obstruction prevents attachment in between the beams,
mount the clip on top of the beam and into the side of the rafter.
www.backyardlivingstructures.com
15
800-352-1672