Whirlpool W10240546A Installationsanleitung und Gebrauchs- und Pflegeanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Installationsanleitung und Gebrauchs- und Pflegeanleitung für Lüftungshaube Whirlpool W10240546A herunter. Whirlpool W10240546A 24 Seiten. 30" (76.2 cm) and 36" (91.4 cm) range hood

Seite drucken

Make Electrical Connection

WARNING

Fire Hazard

Electrically ground the blower.

Use copper wire.

Connect ground wire to green ground screw in

terminal box.

Failure to do so can result in death, fire, or

electrical shock.

Direct Wire Installation

1. Connect the white wire of the home power supply cable with

the white wire in the range hood using a UL listed wire

connector.

A. White wires

B. Black wires

C. Green ground screw

D. Ground wire

E. UL listed or CSA approved strain relief

F. UL listed wire connector

2. Connect the black wire of the home power supply cable with

the black wire in the range hood using a UL listed wire

connector.

3. Connect ground wire (green or bare) of home power supply

cable to the green ground screw in the terminal box.

4. Tighten strain relief screws.

5. Install the terminal box cover.

6. Reconnect power.

Complete Installation

Install 75-watt (max.) incandescent light bulb

1. Squeeze the plastic lens cover and remove it from the hood.

A. Light bulb socket

B. Lens cover

2. Screw light bulb into socket.

3. Replace lens cover by squeezing cover and inserting tabs

into slots.

Install Charcoal filter

For non-vented (recirculating) installations:

Install charcoal filter pad Part Number 4378581 available from

your dealer. See "Range Hood Care" section for installation

instructions.

Check Range Hood Operation

1. Check light operation by turning the light knob.

2. Check operation of fan by turning the fan knob.

3. If the range hood does not operate, check to see whether a

circuit breaker has tripped or a house fuse has blown.

4. NOTE: To get the most efficient use from your new range

hood, read the "Range Hood Use" section.

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors

and odors from the cooktop area. For best results, start the hood

before cooking and allow it to operate several minutes after the

cooking is complete to clear all smoke and odors from the

kitchen.

The hood controls are located on the front right-hand side of the

range hood.

A. Fan control

B. Light control