Clare Controls HDBaseT-C.tx70 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender Clare Controls HDBaseT-C.tx70 herunter. Clare Controls HDBaseT-C.tx70 20 Seiten. Hdbaset compact extender set 70m

Seite drucken

Figure 3: System connection

Connection procedure

To connect the HDBaseT Compact Extender Set 70m:

Connect HDMI from the source (such as Blu-ray DVD) to the HDMI IN port of the

transmitter using an HDMI cable.

Connect the HDBT OUT port of the HDBaseT-C.tx70 to the HDBT IN port of the

receiver with a single CAT5e/CAT6 cable using TIA/EIA T568B terminations at

each end.

Connect the HDMI OUT port of the HDBaseT-C.rx70 to an HDMI in port on the

display using an HDMI cable.

When using the bi-directional IR control, do the following.

a. Connect the IR emitter at either end to the IR TX port on either the

HDBaseT-C.tx70 transmitter or the HDBaseT-C.rx70 receiver.

b. When using a powered IR receiver, connect via a 3.5 mm stereo plug to the

IR RX on either the HDBaseT-C.tx70 transmitter or the HDBaseT-C.rx70

receiver.

c. When using a control system to send IR signals, you must use the included

3.5 mm male mono to 3.5 mm male stereo adapter cable (included) must be

used. The male mono end connects to the control system; the male stereo end

connects to HDBaseT-C.tx70.

Connect the 12 VDC power adapter to the power port on the

HDBaseT-C.tx70 transmitter. The HDBaseT-C.rx70 receiver is powered through

PoH.]

HDBaseT Compact Extender Set 70m User Guide