Firestar vi40 Schnellstart-Handbücher - Seite 10

Blättern Sie online oder laden Sie pdf Schnellstart-Handbücher für Messgeräte Firestar vi40 herunter. Firestar vi40 15 Seiten. Dual cooled laser

Firestar™ vi30/40 Dual Cooled Laser Quick Start Guide

Electrical Connections:

12. Connect the Laser negative (black) and the positive (red) DC power into the laser's power supply.

Caution

Possible

Equipment

Damage

DC power:

Note:

The negative (–) side of the DC input to the laser is internally connected so that the laser chassis

serves as DC power ground. If you need to isolate the body of the laser from the equipment chassis

ground, use an insulating pad or film and insulated mounting hardware.

OEM vi30/40 lasers can also be controlled from an alternate user-supplied Command signal source.

Refer to Controlling laser power in the Technical Reference chapter for control signal descriptions

and refer to DB-9 I/O connections, also in the Technical Reference chapter, for signal specifications

and connection details.

Be sure to also reference the technical reference chapter of the

applying 48 VDC, but before operating the laser, you must provide a Laser Enable input signal to

the DB-9 I/O connector. See DB-9 I/O connections in the Technical Reference chapter within the

operation manual for pinouts and signal descriptions.

DC Power

(-) Black

DC Cable

(+) Red

DC Cable

DC Power connection locations (for the Laser).

Do not reverse polarity when connecting the DC Power cable to the vi30 laser.

Attach the red (+) wire(s) from the DC Power cable to the positive (+) 48 VDC

output terminal and attach the black (-) wire(s) from the DC Power cable to

the negative (-) 48 VDC output terminal. Refer to the drawings located on our

website.

laser's operation

manual. When

vi30/40 Dual Cooled QSG Version 2.1