AER domino 3 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrumenten-Verstärker AER domino 3 herunter. AER domino 3 8 Seiten.
Auch für AER domino 3: Benutzerhandbuch (16 seiten), Handbuch (18 seiten)
Seite drucken
Back panel
(from left to right):
USB in
This socket serves to make a connection to a PC
USB lamp
Connector for an optional USB lamp
phantom power
ch. 1
9 V
Activates the 9 V phantom
power on channel 1
ch. 3
9 V
Activates the 9 V phantom
power on channel 3
48V
Turns the 48 V phantom power on
ground lift
Disconnects signal ground from protective
ground, thereby eliminating hum problems with
so-called ground loops. This button should nor-
mally remain switched off (i.e. not pressed).
rec out L/R
Preamp output (post EQ, aux in and effects). RCA
sockets
(white = left channel, red = right channel)
aux in L/R
Auxiliary input for additional signal sources like
e.g. CD player. RCA sockets
(white = left channel, red = right channel)
return L/R
Input for the output signals of an external effects
processor (left/right channel with separate 6.3 mm
mono jack sockets).
L/R-out
Preamp output (post EQ, aux in and effects). Adju-
stable via pre out (left/right channel with separate
6.3 mm mono jack sockets).
insert L/R
Insert point for external devices, located behind
the master volume control. One 6.3 mm stereo
jack socket for left and right channel
(each with tip = send, ring = return).
4
send
Output to the input of an external effects unit.
6.3 mm mono jack socket.
active speaker Output to connect an active extension cabinet or
an active subwoofer. 6.3 mm mono jack socket.
headphones
Output for a stereo headphone set.
6.3 mm stereo jack socket.
Never use mono jack plugs,
otherwise the amp could be damaged!
tuner
Output to an external tuner. May also be used
when input is muted. 6.3 mm mono jack socket.
footswitch
connection to a double footswitch to switch inter-
nal and external effect on and off.
(Tip = internal Effect ch. 1, Ring = internal Effect
ch. 2 on/off ). 6.3 mm stereo jack socket.
footswitch
connection to a double footswitch to switch inter-
nal and external effect on and off. (Tip = internal
Effect ch. 3, Ring = internal Effect ch. 4 on/off ).
6.3 mm stereo jack socket.
DI level
Signal level control at the DI output
DI
Balanced preamp output, pre master, post EQ,
with aux in and effects. XLR socket
power on
Combined power switch with fuse holder and IEC
mains socket
tip = int. eff. ch 1
ring = int. eff. ch 2
footswitch
tip = int. eff. ch 3
ring = int. eff. ch 4