Caldwell Shootin' Gallery Montage- und Verwendungshinweise - Seite 4

Blättern Sie online oder laden Sie pdf Montage- und Verwendungshinweise für Zubehör Caldwell Shootin' Gallery herunter. Caldwell Shootin' Gallery 8 Seiten. Motorized moving target system

Seite drucken

ASSEMBLY

Note: A clean workbench or old table will make

assembly easier. An assistant would be helpful for

some of the steps.

STEP 1: Assemble the Motor

Cover to the Legs

Let the two Legs (

923755

Motor Cover (

) to the legs using four M6 Button

352625

Head Cap Screws (

1000741

Pay attention to the orientation of the Motor Cover, it

should be placed as shown in Photo B. Tighten lock nuts.

STEP 2: Assemble the Drive

System Assembly

Note: The chain comes greased, you may want to

wear old clothes and/or light-duty gloves that you don't

mind getting grease on.

Lay the Drive System (368767) on the work surface as

shown in Photo C.

Lifting one side of the Leg and Motor Cover Assembly,

guide the first Leg through the cavity of the Drive

System. Repeat with the other Leg.

) stand parallel. Assemble the

) and four M6 Lock Nuts (

PHOTO B

PHOTO C

Place the Drive System next to the Motor Cover as

shown in Photos D, E, F, and G. Avoid damage to the

motor leads when installing the Drive System. Assemble

four M6 Button Head Screws and Lock Nuts. Make sure

the legs are still parallel. IMPORTANT: The mount-

ing holes are oversized. Slide and hold the Drive

System Assembly away from the motor cover as

you tighten the nuts. This will ensure proper fit

of the Back Cover (986231) in the next step.

1000743

PHOTO F

Pull the Drive System this

direction as you

tighten.

Instructions continued on page 5. >>>>

PHOTO D

PHOTO E