Alcohawk AlcoHawk Slim Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Prüfgeräte Alcohawk AlcoHawk Slim herunter. Alcohawk AlcoHawk Slim 20 Seiten.
Auch für Alcohawk AlcoHawk Slim: Benutzerhandbuch (16 seiten)

Seite drucken

Error Messages

Error Message

Sn or PL

Understanding The Results

The result that displays on this device is an estimate of the subject's

BAC. The Department of Transportation (DOT) employs the standard

of 0.02% as a threshold for a positive test for alcohol in no tolerance

screening. Nearly all states have 0.08% as the legal BAC limit for

tasks such as operating a motor vehicle. Some states prohibit driving

commercial vehicles or any vessel with a 0.04% BAC or higher. This

device should only be used as a screening device and may only give

a reading of the possible presence of alcohol in the blood of the test

subject. Correlation between breath alcohol content and BAC depends

on many factors, including temperature and health conditions. The

exact BAC in the blood of the test subject cannot be exactly

determined by using a breath alcohol screening device. Never

drink and drive.

Cause and Course Of Action

There has been an error with the sensor. This can occur if

the test subject does not wait at least 20 minutes after

smoking, eating or drinking before using the unit. or if

the unit has not been used for an extended period of time.

Press the Power On/Off button once to turn off the unit

and repeat Steps 1 – 6 above. If this message is

displayed four consecutive times, the unit may need

serviced.

Repeat the test because the unit did not detect an even

alcohol concentration in the breath sample. This can

occur if the user varies the blowing force when performing

a test or if the exhaust port is obstructed. Repeat Steps

1 – 6 above to perform another test.

The unit detected a very high alcohol concentration

(above 0.40% BAC).

Low Battery. Replace AA batteries.