Alcolock IGNITION INTERLOCK WR3 Gebrauchsanweisung - Seite 13
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Prüfgeräte Alcolock IGNITION INTERLOCK WR3 herunter. Alcolock IGNITION INTERLOCK WR3 16 Seiten.
Wait...
20 seconds
Enter Override?
20 seconds
Yes
No
Start motor
Override
Hold Right
Button to
Cancel Restart
INSTRUCTION MANUAL
2. Wait... will be displayed and a timer will start a 20 second
countdown. During the countdown you may exit Override
and return to the user menu by pressing and holding the right
button.
To continue with Override wait until the countdown is over.
NOTE: Selecting Override will trigger an audible and visual alarm.
The alarm will remain active unless the user exits Override or turns
off the motor.
3. Once the initial countdown is over, Enter Override? will be
displayed and you will then have an additional 20 seconds to
confirm your intention to activate Override.
Press and hold the left button to activate Override. Press and
hold the right button to exit Override and return to the user
menu.
NOTE: If the user does not press either the left or right button
before the additional 20 second period expires, the WR3 will
automatically exit Override and return to the user menu.
4. Once Override is activated, the motor may be started without a
breath test. Start Motor is displayed on the screen. An audible
and visual alarm will be active whenever the motor is running.
5. While in Override, the vehicle may be driven without a breath
test. Once the motor is turned off, the vehicle may be restarted
for up to 60 minutes without a breath test. After that, the
WR3 will automatically exit Override and a breath test will be
required to start the vehicle.
6. Once the motor has been started following activation of
Override, the WR3 will display Hold Right Button to Cancel
Restart whenever the motor is shut off. This message will
be displayed for up to 60 minutes, during which time you can
restart the vehicle without a breath test or press the right button
to exit Override. After 60 minutes, the WR3 will automatically
exit Override. A breath test will then be required to restart the
vehicle.
NOTE: After exiting Override, this feature cannot be activated
again until the WR3 has been reset by the interlock service
provider.
10