Direct Air RG52A2/BGCEF Installationsanleitung Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Fernsteuerung Direct Air RG52A2/BGCEF herunter. Direct Air RG52A2/BGCEF 8 Seiten. Air conditioner remote controller
Seite drucken
9
UP Button(
Push this button to increase the indoor
temperature setting in 1 C increments to 30 C.
DOWN Button(
Push this button to decrease the indoor
temperature setting in 1 C increments to 17 C.
10
SHORTCUT Button
Used to restore the current settings or resume
previous settings.
9
On the first time connecting to the power, if
1
10
push the SHORTCUT button, the unit will
ON/OFF
SHORT
CUT
operate on AUTO mode, 26 C, and fan speed
11
is Auto.
2
MODE
TIMER ON
Push this button when remote controller is on,
TEMP
3
the system will automatically revert back to the
FAN
12
TIMER OFF
previous settings including operating mode,
4
13
SLEEP FRESH
setting temperature, fan speed level and sleep
5
14
feature(if activated). And transmit the signals
TURBO SELF CLEAN
LED FOLLOW ME
6
to the unit.
15
If push this button when remote controller is off,
7
the system will only resume the previous
8
settings and will not transmit the signals to the
unit. And the sleep feature is disable.
If pushing more than 2 seconds, the system
will automatically restore the current operation
settings including operating mode, setting
temperature, fan speed level and sleep
feature(if activated ).
11
TIMER ON Button
Press this button to initiate the auto-on time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10.0, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-on time to 0.0.
12
TIMER OFF Button
Press this button to initiate the auto-off time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10.0, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-off time to 0.0
)
o
)
o
O
5 5
o
o
1
ON/OFF
SHORT
CUT
2
MODE
TIMER ON
TEMP
3
FAN
TIMER OFF
4
SLEEP FRESH
5
TURBO SELF CLEAN
LED FOLLOW ME
6
7
8
13
Swing
Button
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle
for each press. And the temperature display
,
area of indoor unit displays
second. If keep pushing more than 2 seconds,
the vertical louver swing feature is activated.
And the display area of indoor unit displays
,
,
, flashes four times, then the tempera-
IIII
ture setting reverts back. If the vertical louver
9
swing feature is stopped, it displays LC and
remains on for 3 seconds.
10
11
Swing
Button
14
Used to stop or start horizontal louver move-
12
ment or set the desired up/down air flow
direction. The louver changes 6 degree in angle
13
for each press. If keep pushing more than 2
14
seconds, the louver will swing up and down
15
automatically.
FOLLOW ME Button:
15
Push this button to initiate the Follow Me
feature, the remote display is actual tempera-
ture at its location. The remote control will
send this signal to the air conditioner every 3
minutes interval until press the Follow Me
button again. The air conditioner will cancel
the Follow Me feature automatically if it does
not receive the signal during any 7 minute
interval.
NOTE:
Buttons design might be slightly different
from the actual one you purchased depending
on individual models.
All the functions described are accomplished
by the indoor unit. If the indoor unit has no
this feature, there is no corresponding
operation happened when press the relative
button on the remote controller.
6 6
,
for one
,
,