AlcoMate AccuCell AL9000 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Prüfgeräte AlcoMate AccuCell AL9000 herunter. AlcoMate AccuCell AL9000 8 Seiten. Digital personal breathalyzer
Seite drucken
Keep out of extreme temperatures and out of the reach of children.
To maintain accuracy, the sensor inside the AccuCell must be recalibrated every 1000 tests or at least
once a year (whichever comes first). Large numbers of "high positive" (high alcohol) readings may
require recalibration of the sensor much sooner than normally expected.
Troubleshooting
WARNING DISPLAY "Flow": If you see "Flow" in the display, the breath sample was not strong or
long enough for measurement. Please try again and make sure the breath is strong and steady
during sampling. As soon as you start blowing into the device, you will hear a long beep indicating
how long you should blow.
WARNING DISPLAY "bAt": If you see "bAt" in the display, the battery power is low. Please replace
the batteries with a new pair. Make sure to properly align the batteries by looking at the +/- marks.
WARNING DISPLAY "Err2": If either of these codes appear in the display, the device is reporting a
general problem with the alcohol sensor, or that the device has been physically damaged.
Please replace sensors or contact AK GlobalTech Corp.
WARNING DISPLAY "Err9": Power source is too weak to complete operation. Please replace
batteries with a new pair.
For the other troubles, please contact AK GlobalTech at [email protected], along with your
error codes and photos if available.
Replace
the
batteries
Wait for
the
display to
show
"blow".
Your
reading will
be
displayed
on the
screen in
g/dL
("%BAC").
5