ALCON ALCON-883BH Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schnurloses Telefon ALCON ALCON-883BH herunter. ALCON ALCON-883BH 15 Seiten. High quality cordlessphone system
Seite druckenHandset Unit
NOTE
When the distance between handset unit and base unit is too far, the INT indicator will flash
several times without ringing.
TRANSFERRING CALLS
From Base Unit to Remote / Mobile (Only if you have a Normal Telephone Connected to the
Base Unit that has the "HOLD" function)
BASE UNIT
It is necessary to connect a normal telephone that has the "HOLD" function to the Base Unit.
5. If you have more then one Handset Unit in your
network, press the Select button to choose which
handset you wish to link with. Press the Select
button to move from handset 1, 2, 3, or 4. Once
you have selected the handset, press the Int button
and only this unit will ring. Use the same
procedures to communicate with this unit.
1. Handsets will ring.
The indicators of IN USE will flash. This means that the
base station is calling.
2. Press any key to begin talking.
The IN USE indicator which answers the call will
illuminate during a conversation.
3. To finish the conversation, press
end the conversation. The base unit and handset will
return to the standby mode automatically.
1. An incoming call comes into the system.
Press "HOLD" on the normal telephone. The call will be
put on hold automatically.
2. Select the handset.
You Wish to communicate with by pressing the "SELECT"
button and then press INT. Tell the person at the handset
that he has an incoming. The person on the handset will
hang up and then answer again. In the meantime, the
person on the Base will take the person off of hold and
the call will automatically be transferred to the handset
unit.
on the handset to
7