Ergo Furniture UL1-05 Installationshandbuch

Blättern Sie online oder laden Sie pdf Installationshandbuch für Inneneinrichtung Ergo Furniture UL1-05 herunter. Ergo Furniture UL1-05 2 Seiten. Single motor standing desk

Seite drucken

Step 1

图

As the picture 2 show: Pass the Hexagonal rod (part 7) through the

hexagonal hole of the Motor (part 5).

Step 2

Insert the Hexagonal rod assembled in Step 1 into the hexagonal

hole of the Right lifting leg (part 2) through the Motor Gasket (part

G), and tighten it with (part C) Screw M5x30.

Step 3

Insert the other side of the Hexagonal rod into the hexagonal hole

of the Left lifting leg (part 3) and Right lifting leg (part 2), and

attach the Crossbeam (part 6) to the Lifting leg (parts 2 and 3)

using (part A) Screw M6x10.

Step 4

Attach the Side bracket (part 4) to the Crossbeam (part 6) using

(part A) Screw M6x10.

Single Motor Standing Desk Installation Manual

①Foot

②Right lifting leg

③Left lifting leg

④Side bracket

⑤Motor

⑥Crossbeam

⑦Hexagonal rod

图

UL1-05

A Screw M6x10

B Screw M6x16

C Screw M5x30

D Wood screw ST4.8x16

E Wood screw ST4.2x16

F Allen wrench 4mm

G Motor Gasket

H Cable clip

I Power cable

J Handset

Step 5

Attach Foot (part 1) to the Lifting leg (parts 2 and 3) using (part B)

Screw M6x16.

Step 6

Adjust Crossbeams to the proper position to fit the desktop. Tighten

the (part D) Wood screw ST4.8x16 to lock. Attach the Handset (part J)

to the underside of the desktop using (part E) Wood screw ST4.2x16.

Step 7

Tighten Crossbeams (part 6) using (part A) Screw M6x10. Adjust the

Hexagonal rod (part 7) to the proper position and tighten the plastic

screw.

Step 8

Connect the Motor cable (part 5) and Power cable (part I) to the

Handset (part J).

Parts Included

Qty