Ergo Tab EBLTK4 Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Racks & Ständer Ergo Tab EBLTK4 herunter. Ergo Tab EBLTK4 12 Seiten. Tv wall mount

5B-1

5B-2

5B-3

Use the hammer to knock

anchors [B] into the wall.

Be sure the anchors [B]

are seated ﬂush with the

concrete surface.

3/8 in.(10 mm)

Socket Wrench

(Not included)

Install the wall plate [01] or [01 and 02] using lag

screws [A] and anchors [B]. Tighten the lag screws

[A] only until they are pulled ﬁrmly against the wall

plate. DO NOT over-tighten the lag screws [A].

Position the wall plate [01] or [01

and 02] at your desired height, level

the wall plate and mark the pilot hole

locations.

Drill 4 pilot holes using a 3/8 in.(10 mm)

diameter drill bit. Make sure the depth is

not less than 2.4 in.(60 mm). Never drill

into the mortar between blocks.

2.4 in.(60 mm)

3/8 in.(ø10 mm)