CALEFFI DISCAL 551716 Series Anweisungen für Installation, Inbetriebnahme und Wartung - Seite 2
Blättern Sie online oder laden Sie pdf Anweisungen für Installation, Inbetriebnahme und Wartung für Water Filtration Systems CALEFFI DISCAL 551716 Series herunter. CALEFFI DISCAL 551716 Series 12 Seiten. Air separator
Auch für CALEFFI DISCAL 551716 Series: Anweisungen für Installation, Inbetriebnahme und Wartung (12 seiten)
Seite drucken
Technical specifications
Brass air separator
Materials
- body:
- internal element
(compact and rotating collar versions):
- internal element:
- seal:
- air vent float:
- air vent float linkages:
- air vent float guide pin:
Performance
Suitable fluids:
Max. percentage of glycol:
Max. working pressure:
Temperature range:
Air separation efficiency:
Connections - main:
compact series:
horizontal:
rotating collar version, 5517 series: ¾" and 1" sweat, press and NPT male union
- lay length (press connection):
-
drain:
Steel air separator
Materials
- body:
- internal element:
- seal:
- air vent float:
- air vent float linkages:
- air vent float guide pin:
Performance
Suitable fluids:
Max. percentage of glycol:
Max. working pressure:
Temperature range:
Air separation efficiency:
Connections - flanged:
- drain pipe:
Agency Approval
NA551 series is designed and built in accordance with Section VIII, Division 1 of the ASME Boiler
and Pressure Vessel Code and tagged and registered with the National Board of Boiler
and Pressure Vessel Inspector, and CRN registered.
32–250°F (0–120°C); w/ service check, max 230°F (0–110°C)
3/4" , 1" , 1-1/4",
5517 series:
sizes 2-6": 150 psi (10 bar); sizes 8-12": 200 psi (14 bar)
2
304 stainless steel
glass reinforced nylon PA66GF30
peroxide-cured EPDM
water, glycol solution
150 psi (10 bar)
100% to micro-bubble level
3/4" sweat; 3/4" NPT female
1-1/2"
and 2" NPT female
1" , 1-1/4",
1-1/2"
and 2"integral sweat
1",1-1/4",1-1/2"
and 2" integral press
see page 4 and 5
1/2"
1/2" straight female
epoxy resin painted steel
304 stainless steel
peroxide-cured EPDM
water, glycol solution
32–270°F (0–132°C)
100% to micro-bubble level
2"– 12" ANSI B16.5 150 CLASS RF
sizes 2 - 6 inch: 1" NPT male
sizes 8 - 12 inch: 2" NPT male
brass
PP
stainless steel
stainless steel
50%
NPT female
PP
stainless steel
stainless steel
50%