Alcoscan AL4000 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Prüfgeräte Alcoscan AL4000 herunter. Alcoscan AL4000 6 Seiten. Coin operated breathalyzer

a. The power of the product was set at 110V (or 220V) by default. You need to make sure

the voltage is collect.

b. Make sure that the line attached to the power adapter is connected correctly to the

power socket on the bottom of the machine.

2. You inserted a coin, but the machine does not work.

a. Make sure you use the proper coin. The machine only accepts the specified kind and

others are returned.

b. Select 'Coin number' using the SW2 button, and then make sure the number set on the

display window is correct. As explained above, the machine will work only if you use

this number of coins.

3. There is no buzzer sound.

The option for buzzer sound can be selected. In the set up mode, check the status of the

set up as explained above.

4. You blow, but the machine does not respond.

Check if the display window shows "Sensor error".

If it does, the machine may have a problem. You need to take the action corresponding to

the error number as previously explained.

5. After testing, the machine does not go back to the waiting mode.

The machine displays the result value for about 10 seconds. In order to go back to the

measuring mode, the alcohol blown into the machine must be eliminated completely.

The amount of alcohol increases the time required for this elimination to be competed, but

it normally does not exceed a minute. If it takes more than one minute, the sensor may be

malfunctioning.

You should contact customer services in this case.

Warranty

The manufacturer warrants the product to be free from defects in workmanship or material

(excluding calibration) under normal use for six (6) months from the date of purchase.

The manufacturer's obligation under this warranty is limited to replacing, adjusting or

repairing the unit if returned along with proof of purchase. This warranty is void if the unit

has been tampered with or maliciously damaged.

Recalibration & Service

For recalibration and technical support, please contact us at: