AlcoSense PRODIGY Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Prüfgeräte AlcoSense PRODIGY herunter. AlcoSense PRODIGY 18 Seiten.

OPERATING INSTRUCTIONS

PASSIVE TEST

Attach a sampling cup to the sample port and select the

When the screen displays "Please Blow", take a deep breath and

blow towards the sampling cup until the BEEP tone stops.

"Alcohol Detected" or "No Alcohol" displays on the screen.

Alternatively, a passive test can be performed by selecting

"Passive" whilst the user is blowing.

Select

to start another test.

If the screen shows "Alcohol Present", use a mouthpiece to

perform a standard test so that an accurate BAC reading can be

obtained.

NOTE: A "Passive Test" is only used for screening; it checks for

the presence of alcohol in a breath sample. An accurate test

result can only be obtained through use of a "Standard Test" with

a mouthpiece.

NOTE: Test records of the passive tests cannot be printed or

stored.

The optimum temperature range for operating the unit

icon.

is -10°C -50°C. Use within this temperature range will

limit condensation from the subject's breath and ensure

an accurate reading is taken. It is recommended that

the operator observes the subject for approximately

20 minutes before administering the breath test. This

is to ensure the subject does not consume anything.

Following this procedure will ensure the subject's saliva

is clear of alcohol so it does not alter the outcome of

the breath sample test.