AerAtron AE+3 Series Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Fan AerAtron AE+3 Series herunter. AerAtron AE+3 Series 18 Seiten.

Pairing the Remote Control

STEP 6

Pairing a Single Fan per remote control: LEARN MODE

NOTE: Blades must be attached prior to testing the fan

1. On Receiver: Verify that the "Learn" switch is in the "O" position

2. Open battery cover & insert batteries.

3. Switch on the main power to activate the receiver, indicated

by one beep. (Energise one fan reciever at a time).

4. Within 60 seconds after the power is turned on (one beep),

press and hold the ON/OFF button on the Remote Control

(min. 3 secs.) until Fan Receiver issues three 'beeps' which

indicates successful pairing.

5. On Receiver: switch the "Learn" switch to "X" (this will

lock the pairing code with the remote)

6. Finish STEP 7, 8 & 9 and press ON/SPEED button to test

fan functions.

7. To re-pair, repeat steps 3 to 5

NOTE: Power must be oﬀ for 10 seconds min. before repairing.

The Remote Control and Fan Receiver will memorise the pairing

code for future use even if mains power is switched oﬀ.

LIGHT SWITCH: Select ON/OFF or DIMMING for the light function.

(Light will maintain last setting if turned oﬀ)

Pairing Multiple Fans per Remote Control

One remote control can control up to 8 fans (within a 7m (23") radius).On ALL receivers verify that

the "Learn" switch is in the "O" position. Switch on the mains power to activate ALL receivers at the

same time, indicated by one 'beep'. Within 60 seconds, press and hold the ON/OFF button on the

remote control (min. 3 seconds) until fan receiver issues three 'beeps'.

The remote control is pre-programmed

No pairing with the receiver required

Controlling the Fan

1. Fan ON/OFF

2. Fan Speed UP/DOWN

2a. Fan Speed indicator 1-6

3. Forward / Reverse

3a. Use Forward mode (counterclockwise) for cooling

3b. Use Reverse mode (clockwise)

to circulate warm air

4. Light ON/OFF

4a. To DIM, press and HOLD light button

to cycle from bright to dark.

(LIGHT SWITCH at DIMMING position)

LIGHT SWITCH

O LIGHT DIMMING

| LIGHT ON/OFF