Acond Hydromodul Grandis-N Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Warmwasserbereiter Acond Hydromodul Grandis-N herunter. Acond Hydromodul Grandis-N 17 Seiten.

Seite drucken

Hydromodul

6.1.1 Electrical preparation

The electrical connection is made from the bottom side, where leave a free cable length of at

least 2m. The cables to be brought in are given by the diagrams annexed to this document.

6.2 Indoor room unit

The indoor C-ID room unit shall be placed in a heated reference room. The heating rod will be

switched if the temperature in the reference room unit drops below the set temperature in the

AcondTherm regulation.

A thermostatic valve shall not be placed in the reference room.

7 Installation

When installing, follow the order as shown below.

7.1 Mounting of the attached assembly

Attach the included assembly with pliers above the Hydromodule covers, see the following

picture. Use the seal correctly.

Installation manual