Xerox 6200DX - Phaser Color Laser Printer Netzwerk-Handbuch - Seite 22

Blättern Sie online oder laden Sie pdf Netzwerk-Handbuch für Drucker Xerox 6200DX - Phaser Color Laser Printer herunter. Xerox 6200DX - Phaser Color Laser Printer 50 Seiten. Specialty printing phaser 6200 series
Auch für Xerox 6200DX - Phaser Color Laser Printer: Broschüre & Specs (4 seiten), Handbuch für Einrichtung und Kurzanleitung (49 seiten), Papier-Handbuch (27 seiten), Installationsanleitung Handbuch (12 seiten), Support-Handbuch (26 seiten), Handbuch zur Fehlersuche (42 seiten), Spezifikation (12 seiten)

Seite drucken
Xerox 6200DX - Phaser Color Laser Printer Netzwerk-Handbuch

Windows NT 4.x Network

This section provides installation and troubleshooting steps for Windows NT 4.x:
Preliminary steps — see page 17.
Quick CD-ROM install steps — see page 17.
Other methods of installation — see page 18.
Windows NT 4.x troubleshooting (TCP/IP) — see page 21.
Windows NT 4.x troubleshooting (AppleTalk) — see page 22.

Preliminary steps

The preliminary steps given below must be accomplished for all printers regardless of the method that is
being used.
1.
Verify that the printer is plugged in, turned on, and connected to an active network.
2.
Verify that the printer is receiving network traffic by monitoring the LED's on the back of the
printer or on the CentreDirect External Print Server. When the printer is connected to a
functioning network receiving traffic, its link LED is green, and its traffic LED (amber) is flashing
rapidly.
3.
Print the Configuration Pages and retain them for reference. For information on using the front
panel or printing Configuration Pages, refer to the Front Panel section of the Features Guide of
the Interactive Documentation CD-ROM.
4.
Check the Configuration Pages and verify that the desired protocol is enabled.
5.
Proceed to the Quick CD-ROM install steps or Other methods of installation section for the
installation method desired.

Quick CD-ROM install steps

1.
Insert your printer's Printer Installer and Utilities CD-ROM into your computer's CD-ROM
drive. If your PC is set to autorun, a Xerox installer should automatically start. If it does not start,
do the following:
a.
Click Start and Run.
b.
In the Run window, type: <CD drive>:\INSTALL.EXE.
2.
Select your desired language from the list.
3.
Install the printer drivers for your printer. Within the Xerox installer, select Printer Drivers, and
then select Install Xerox Phaser 6200 Color Printer Drivers.
4.
Click Yes to accept the Xerox Software License Agreement.
5.
The Xerox installer searches the network and displays the first printer found. Click Next to accept
this printer.
Copyright © 2002 Xerox Corporation. All Rights Reserved.
Phaser® 6200 Color Laser Printer
17