Xerox 6200DX - Phaser Color Laser Printer Netzwerk-Handbuch - Seite 35

Blättern Sie online oder laden Sie pdf Netzwerk-Handbuch für Drucker Xerox 6200DX - Phaser Color Laser Printer herunter. Xerox 6200DX - Phaser Color Laser Printer 50 Seiten. Specialty printing phaser 6200 series
Auch für Xerox 6200DX - Phaser Color Laser Printer: Broschüre & Specs (4 seiten), Handbuch für Einrichtung und Kurzanleitung (49 seiten), Papier-Handbuch (27 seiten), Installationsanleitung Handbuch (12 seiten), Support-Handbuch (26 seiten), Handbuch zur Fehlersuche (42 seiten), Spezifikation (12 seiten)

Macintosh EtherTalk Network

(MacOS 8.x/9.x/X, version 10.1)

This section provides installation and troubleshooting steps for Macintosh (MacOS 8 through X,

version 10.1):

Quick install steps for MacOS 8.x and 9.x — see page 31.

Quick install steps for MacOS X, version 10.1 — see page 33.

Setting up the Macintosh Ethernet port for TCP/IP or AppleTalk — see page 33.

Macintosh troubleshooting step-by-step — see page 34.

A workstation with the appropriate driver installed.

A working knowledge of the operating system (System 8.0+ or higher) being used on your

workstation.

Proper cabling in use to connect your printer to the network.

If you use EtherTalk, Macintosh computers do not require IP addresses.

Open the AppleTalk Control Panel.

Verify that the Ethernet port is the selected network port.

To install the printer driver, double-click the installer on the Printer Installer and Utilities

CD-ROM.

Perform the next two steps for MacOS 8.x and 9.x.

Open the Chooser, select the LaserWriter driver.

From the right column of the Chooser, select the printer. Click Create to create the desktop

printer.

Perform the next two steps for MacOS X, version 10.1 only.

Open Print Center.

Click Add Printer, select the printer, then click Add.

For more details, refer to the infoSMART Knowledge Base at

www.xerox.com/officeprinting/infoSMART, Document #2562.

Phaser® 6200 Color Laser Printer