Xerox 6200DX - Phaser Color Laser Printer Netzwerk-Handbuch - Seite 38

Blättern Sie online oder laden Sie pdf Netzwerk-Handbuch für Drucker Xerox 6200DX - Phaser Color Laser Printer herunter. Xerox 6200DX - Phaser Color Laser Printer 50 Seiten. Specialty printing phaser 6200 series
Auch für Xerox 6200DX - Phaser Color Laser Printer: Broschüre & Specs (4 seiten), Handbuch für Einrichtung und Kurzanleitung (49 seiten), Papier-Handbuch (27 seiten), Installationsanleitung Handbuch (12 seiten), Support-Handbuch (26 seiten), Handbuch zur Fehlersuche (42 seiten), Spezifikation (12 seiten)

Seite drucken
Xerox 6200DX - Phaser Color Laser Printer Netzwerk-Handbuch

Quick install steps for MacOS X, version 10.1

Requirements

Ensure that you are running MacOS X, version 10.1. The previous versions of MacOS X does not fully
support PostScript printing and printer features.
Setting up the Macintosh Ethernet port for
TCP/IP or AppleTalk
If your Macintosh is not already set up for TCP/IP, perform the following procedure:
1.
From the System Preferences application, select Network. Select TCP/IP.
2.
From the Active Ports menu, check Built-In Ethernet.
3.
From the TCP/IP tab, specify how you will obtain the IP address: Manually or by DHCP.
4.
If you select Manually, specify the IP address in the dialog box. You also need to enter
information for the Subnet Mask, Router Address, and Name Server Address.
5.
If you wish to use
AppleTalk,
box is checked.
6.
Close the dialog box.

Creating an LPR printer with MacOS X, version 10.1

1.
Open the Print Center Utility. (This Apple utility is usually found in a directory called Utilities
in the Applications directory.)
2.
Select Add Printer, then select LPR Printers Using IP from the pull-down menu.
3.
In the LPR Printer's Address field, enter the printer's IP address or host name.
4.
In the Queue field, enter PS (all upper-case). Click OK.
5.
Under the Printer Model pull-down menu, select the appropriate PPD from the list. If your
printer's PPD is not listed, install it from the printer's Printer Installer and Utilities CD-ROM.
6.
Click Add to complete the configuration.

Creating an AppleTalk printer with MacOS X, version 10.1

1.
Ensure that AppleTalk is enabled in System Preferences.
2.
Open the Print Center Utility. (This Apple utility is usually found in a directory called Utilities
in the Applications directory.)
3.
Select Add Printer, then select AppleTalk from the pull-down menu.
4.
Select the appropriate zone.
5.
Choose your printer from the list provided.
6.
Under the Printer Model pull-down menu, select the appropriate PPD from the list. If your
printer's PPD is not listed, install it from the printer's Printer Installer and Utilities CD-ROM.
7.
Click Add to complete the configuration.
Phaser® 6200 Color Laser Printer
Macintosh EtherTalk Network (MacOS 8.x/9.x/X, version 10.1)
select the AppleTalk tab and ensure the Make AppleTalk Active
33