Xerox AltaLink B8000 Series Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Drucker Xerox AltaLink B8000 Series herunter. Xerox AltaLink B8000 Series 20 Seiten.
Seite druckenReduce/Enlarge
For non-standard reduction or enlargement you can select a ration between
25% and 400% if you are copying from the document glass or 25% to 200% if
using the Document Feeder.
When using the glass, position the document along the top of the glass in
the upper left corner where the black arrow is located.
• The Up or Down arrows incrementally reduce or enlarge the percentage.
You can either touch the window containing the ratio and type in the required
ratio using the numeric keypad or scroll to a specific ratio.
• Presets are available that will increase/decrease from one size to another.
Example, 64% will reduce an 11x17" to 8.5x11", and 129% will enlarge 8.5x11" to
11x17".
Edge Erase:
Enables you to specify how much of the image to erase around the edges of
your document. For example, you can remove the marks caused by punched
holes, a header/footer, page number or staples in your original.
• All Edges is used to erase an equal amount from all the edges. Use the
arrow buttons to adjust the amount to be erased from 0.1" to 2.0". All
marks or defects within the measurement set are deleted.
• Individual Edges enables an individual amount to be erased from each of
the edges, on both the first and second sides. Use the arrow buttons to
adjust the amount to be erased from 0.1" to 2.0".
Book Copying:
This feature enables you to specify which page or pages of a book are to be
scanned. The book original is placed face down on the document glass with
the spine of the book lined up with the marker at the center of the rear
edge of the document glass. Align the top of the bound original against the
rear edge of the document glass.
The device will identify the size of the original during scanning.
• Both Pages scans both pages, the left page of the book first will be
scanned first. Use the arrow buttons to specify an amount from 0 to 2"
to be deleted from the center of the book in order to delete unwanted
marks reproduced from the gutter of the book.
• Left Page Only scans the left page only.
• Right Page Only scans the right page only.
Original Size: Mixed Sizes
Original Size allows you to specify automatic size detection of the originals,
run mixed size originals, or the specific size of the image to be scanned.
• Auto Detect is the default setting and enables automatic size sensing. The size
detected is matched to a standard size paper.
• Preset Scan Areas allows you to define the size of your original from a list of
preset, standard original sizes.
• Custom Scan Areas is used to enter a specific area for scanning. Measure
the area to be scanned on the original and enter the X and Y axis measurements
into the fields provided. Only the area specified is scanned.
• Mixed Size Originals allows you scan documents containing different
size pages. The pages must be the same width, like (8.5x11" LEF and 11x17" SEF),
other combinations are shown on the screen. The device detects the size of the
documents and can produce the following output:
• If Auto Reduce/Enlarge and a specific Paper Supply is selected, all the
images are reduced or enlarged and copied onto the same size paper.
• If Auto Paper supply is selected, the images are copied size for size and a
mix of paper sizes will be printed. Example 8.5x11" and 8.5x14" SEF.
Common Copy Features
*Preset Scan Area and Custom Scan Area are helpful when copying
from odd sized books and/or reducing/enlarging.
Page 7