9. When the Add Printer Wizard prompts for a printer name, type the desired local
logical printer name and append "_hold" if you are adding a hold queue or "_print" if you
are adding a print queue. The reason for adding "_hold" or " _print" is because both
queues are represented on the network as identical printer icons (Figure 6).
Adding "_print" or "_hold" to the name identifies the queue type associated with the
icon.
10. When the Add Printer Wizard asks if you want to print the test page, click Yes. After
the test page prints, click Yes again (even if the test page prints incorrectly).
11. Go to Section 5.2.3, on page 17 to setup the printer.
1. If there are no other PostScript printers installed on the workstation, install a dummy,
local, PostScript printer from your operating system install media:
a. Start the Add Printer Wizard by clicking on Start, Settings, Printers and Add
Printers.
b. When the Add Printer Wizard prompts you to specify either a Local Printer or
Network Printer, select Local Printer and click Next.
c.
Follow the prompts. When Add Printer Wizard prompts you for the
Manufacturer and Model of the printer, choose HP and HP LaserJet III Si
PostScript. This copies the non-U.S. English, printer driver software to your
system.
2. To begin the installation of the M Series printer, restart the Add Printer Wizard.
3. When you are prompted for a Local Printer or Network Printer, specify Network Printer
and click Next.
4. When you are prompted for a network path or queue name, enter the Windows network
name of the Splash M Series Color Server's configured print queue. If the hostname is
splashm and the print queue name is splash_print, the Windows network name is
\\splashm\splash_print.
5.
Insert Splash CD-ROM in your workstation CD-ROM drive.
0015647-0001 February 18, 1999
SA
SB
SplashM310
M310_hold
M310_print
S1
S2
S3
SplashM410
M410_hold
M410_print
SC
SD
SE
Figure 6: Color Server Queues
Getting Started Guide
page-15
Seite drucken