Xerox Versant 180 Press Kurzreferenz - Seite 2
Blättern Sie online oder laden Sie pdf Kurzreferenz für Drucker Xerox Versant 180 Press herunter. Xerox Versant 180 Press 6 Seiten. Quick reference for printing extra large sheets (xls) on the ex 180 and ex-i 180 print servers, powered by fiery
Auch für Xerox Versant 180 Press: Sicherheitshandbuch (45 seiten), Kurzreferenz (2 seiten)
Seite drucken
8. Touch Auto Alignment Adjustment.
9. Touch Print Calibration Chart.
10. Touch Paper Supply.
11. Select the Paper Supply tray for the
adjustment/profile needed.
12. Touch the Save button.
13. Set the area coverage if needed
Coverage is the amount of toner covering
the page. Coverage 1 is for Side 1 and
Coverage 2 is for Side 2 of the page. You can
usually leave the coverage set to 1. However,
if you are experiencing alignment problems
repeadedly on print jobs with high area
coverage, you can increase this value
incrementally up to 10.
14. Set the number of sheets to print. With
multiple sheets, the software will use the
average values from all sheets to make
adjustments. Therefore it is best to set at
least 5 sheets. and so the variation between
the sheets will be reduced
15. Touch Print.
16. After the prints are output, touch Confirm.
17. Next, you will collect the printed targets and
scan them. You must choose weather to use
the Document Feeder or the Platen Glass to
scan the targets:
•
If the targeted media is larger than
11x17 (A3) or heavier than 220 gsm,
the Platen Glass must be used.
•
Another factor is selecting either the Document Feeder or the Platen Glass is that while the Document
Feeder is easier and faster, the Platen Glass method is more accurate. The accuracy of the Document
Feeder is within .2 mm, while the accuracy of the Platen Glass is within .1 mm.
Follow these steps to use the Document Feeder (DADF)
a. Place all of the target sheets in the Document Feeder. The orientation of target sheet is not important
when using the DADF.
b. Select the Scan Chart with Document Feeder button on the Touch Screen.
c.
Touch Scan.
d. After the scanning completes, touch Start.
e. Go to Step 20 below to continue.
2