Xerox DocuColor 2006 s Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Kopierer Xerox DocuColor 2006 s herunter. Xerox DocuColor 2006 s 17 Seiten. Product brochures
Auch für Xerox DocuColor 2006 s: Handbuch (27 seiten), Wartungshandbuch (19 seiten), Handbuch verwenden (9 seiten), Anweisungen (4 seiten), Service-Handbuch (7 seiten)

Seite drucken

8. Setting up the network server

The DocuColor 2006 on a TCP/IP network with

Windows NT 4.0

When a Windows NT 4.0 workstation is configured to connect to the

DocuColor 2006 using TCP/IP, it can print directly to the printer. If the

workstation shares the printer over the network, it is acting as a print

server to Windows NT 4.0 clients. The client workstations print to the

DocuColor 2006 by printing to the Windows NT 4.0 print server.

Printing can then be monitored and controlled at the Windows NT 4.0

server.

With TCP/IP protocols loaded, you can also run Fiery WebTools and

utilities from a Windows NT 4.0 or Windows 95/98 workstation.

The Windows NT 4.0 server can also use AppleTalk protocols for

printing. When creating a printer to share with AppleTalk users, do not

capture the printer, as this forces all users to print to the server rather

than directly to the printer. If you capture the printer, print connections

will not be displayed in the Mac OS Chooser.

Ensure that the following are true when TCP/IP network connections

are made:

•

Ensure that the IP addresses are valid for the DocuColor 2006

and for any workstations that will print to it or run Fiery utilities.

•

In Printer Setup, enable TCP/IP and enter the IP address, Subnet

mask and Gateway address for the DocuColor 2006. You can

enter these addresses manually or use DHCP, RARP, or BOOTP

protocols to assign them dynamically.

•

Ensure that the DocuColor 2006 name and address are listed in a

domain name server (DNS) or a hosts name database used by

the system.

•

Ensure that your system host table includes the correct internal

name for the DocuColor 2006 as a remote printer.

•

For Windows NT 4.0, install the DocuColor 2006 PostScript and

PCL printer driver files on the Windows NT 4.0 server from the

User Software CD.

•

Repeat the installation for everyone who prints to the DocuColor

2006. Each server and workstation running the Fiery utilities with

TCP/IP also needs the TCP/IP protocol and the Fiery utility

software.

8–8

Xerox DocuColor 2006