Xerox DocuColor 240 Freigabemitteilung - Seite 11

Blättern Sie online oder laden Sie pdf Freigabemitteilung für Kopierer Xerox DocuColor 240 herunter. Xerox DocuColor 240 34 Seiten. Printer-copier
Auch für Xerox DocuColor 240: Schnellstart-Handbuch (47 seiten), Handbuch installieren (2 seiten), Schnellstart-Handbuch (2 seiten), Handbuch für den Austausch von Hardware (2 seiten), Einstellungen Handbuch (6 seiten), Broschürenerstellung für Kopie (2 seiten), System Settings List (2 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Handbuch für Auswerter (20 seiten), Handbuch für Auswerter (18 seiten)

9 Click OK to close the Properties window.

10 Set the number of copies.

11 Click OK to submit the job for printing.

Printing a booklet from Mac OS X v10.4

On Mac OS X v10.4, the printer driver constrains some selections if an incompatible setting

is selected. For example, you cannot select any Booklet Maker settings unless you ﬁrst set the

Duplex option to Top-Top.

Booklet printing requires that a ﬁnisher is installed on the copier and that the printer driver is

conﬁgured with the installed ﬁnisher. For information about conﬁguring installable options,

see Printing from Mac OS.

The following procedure explains how to set the correct print options for printing an 8.5

document as a booklet on 11

paper, using the Mac OS X v10.4 printer driver.

O PRINT A BOOKLET FROM

1 Open the document in its application.

2 Select File > Page Setup.

3 Choose the Fiery as your printer, set the Paper Size to 8.5x11 SEF (A4 SEF), and click OK.

4 Select File >Print.

5 Choose the Fiery as your printer, and then choose Printer Features from the drop-down list.

6 Choose Paper Source 2 from the Feature Sets list.

7 Set Print Size to 11x17 SEF (A3 SEF).

8 Choose Finishing 1 from the Feature Sets list.

9 Set Duplex to Top-Top.

10 Choose Finishing 2 from the Feature Sets list.

11 Set Fasten Mode to Fold or Fold and Staple.

For the limitations on folding and stapling, see "Fasten Mode" on page 12.

12 Choose Finishing 4 from the Feature Sets list.

13 Set Face-Down Printing to Face up.

14 Choose Finishing 1 from the Feature Sets list.

15 Set Booklet Maker to Saddle.

16 Choose Finishing 3 from the Feature Sets list.

17 paper, or for printing an A4 document as a booklet on A3

OS X

10.4

Page 11

Part Number: 45045321