Xerox M123 WorkCentre Referenzhandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Kopierer Xerox M123 WorkCentre herunter. Xerox M123 WorkCentre 20 Seiten. Stand installation guide
Auch für Xerox M123 WorkCentre: Installationshandbuch (2 seiten), Handbuch für Auswerter (12 seiten), Broschüre & Specs (6 seiten), Handbuch installieren (2 seiten), Netzwerk-Handbuch (50 seiten), Handbuch scannen (28 seiten), Schnellinstallationskarte (2 seiten), Handbuch (28 seiten), Office Finisher Installationshandbuch (6 seiten), Office Finisher Installationshandbuch (6 seiten), Hardware-Installationshandbuch (4 seiten), Installationshandbuch für Hochleistungstabletts (3 seiten), Installationshandbuch für Hochleistungstabletts (3 seiten), Installationshandbuch für das Festplattenkit (2 seiten), Inverter Installation Manual (2 seiten), Installationshandbuch (2 seiten), Hardware-Installationshandbuch (2 seiten), Handbuch zur Standinstallation (2 seiten), Handbuch zur schnellen Netzwerkeinrichtung (7 seiten), Service-Handbuch (22 seiten)

Seite drucken
Xerox M123 WorkCentre Referenzhandbuch
Example 4 Header for Confidential Print
<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF>
@PJL COMMENT Beginning PCL Job<CR><LF>
@PJL SET OUTBIN=MAINTRAY<CR><LF>
@PJL SET QTY=1<CR><LF>
@PJL SET RESOLUTION=600<CR><LF>
@PJL SET HOLD=STORE <CR><LF>
@PJL SET HOLDKEY="1234"<CR><LF>
@PJL SET USERNAME="Nagaoka" <CR><LF>
@PJL SET JOBNAME="Job1" <CR><LF>
@PJL ENTER LANGUAGE=PCLXL<CR><LF>
PCL DATA ..........
<ESC>%-12345X@PJL EOJ <CR><LF>
PCL Feature Dependencies/Caveats
•
All PJL commands must be in the first 2,500 bytes of the job.
•
To combine printer escape commands (not including PJL commands):
−
−
−
−
•
In case of duplicate commands, the last one requested takes precedence.
•
The @PJL SET COPIES takes precedence over the PCL Escape
Command (<ESC>& | int X>) to set copies. In general, a PJL command
takes precedence over a PCL command.
•
Do not duplex any job with these media sizes: A6, B6. A request to duplex
these media sizes is ignored.
•
Do not staple any job with these media sizes: A6, B6, A5, 5.5 x 8.5. A
request to staple these media sizes is ignored.
•
Do not duplex any job with transparencies, labels, envelopes or tab-stock
The duplex print request is ignored if you use any of these media types.
•
Use one of these methods to specify media selection:
−
−
WorkCentre M128/M123 Reference Guide
The first two characters after the <esc> MUST be the same.
All alpha characters MUST be lowercase, except the final terminating
character.
Commands are read left to right. Combine commands in the order you
wish them to execute.
For example, combine print 5 copies (<ESC>&|5X) and use letter size
(<ESC>&|2A) as <ESC>&|5x2A.
Describe the media attributes with size and type and allow the device to
select the correct source tray. If you describe the media, leave source
tray information out of the request or set to Auto. Otherwise, the tray
selection defeats the auto tray selection capabilities of the device.
Indicate the media feed tray to use. In doing so, you allow the device to
select media feed trays based on paper type defined by SYSTEM
DEFAULT unless specified otherwise. This method prevents
inadvertent use of special paper types. To override a paper type
definition, include a paper type specification of UNSPECIFIED in the
job.
Page
17
dc05cc0364