Transparencies
REGAL 5790 MATERIALS USAGE GUIDE
Material Description & Expectations
Transparency stock is used primarily to create images that can be
projected onto a wall or screen. Transparencies are made of
polyester film that is specially coated to make dry ink (toner) readily
adhere to it. The base material and coating type are both very
important in the final quality of the projected image. The
recommended Xerox transparencies meet the critical parameters for
friction, clarity and toner adhesion required for optimum feeding and
color image quality. When run as described below, feeding
performance will be good, but will not equal the reliability of 24 lb LX
(90 gsm) paper.
Recommended Materials
U.S.:
Xerox Removable Stripe, Good Quality , 8.5 x 11" = 3R3108
Xerox Removable Stripe, Good Quality , 11 x 17" = 3R5821
Xerox Removable Stripe, Premium Quality , 8.5 x 11" = 3R5765
Xerox Painted Stripe, Good Quality , 8.5 x 11" = 3R5775
Canada:
Xerox Removable Stripe, Good Quality , 8.5 x 11" = 3R3108
Xerox Removable Stripe, Good Quality , 11 x 17" = 3R5821
Xerox Removable Stripe, Premium Quality , 8.5 x 11" = 3R5765
Xerox Painted Stripe, Good Quality , 8.5 x 11" = 3R4894
1 2 3. . .
Steps for Success
1 Do not run Stripeless transparencies (those without a removable
or painted lead edge white stripe), or Paper-Backed
transparencies in the 5790. These will cause frequent jams and
possible machine damage.
2 Remove all paper from the Paper Tray Bypass before loading
transparencies.
3 Load all transparencies in the Paper Tray Bypass with the white
stripe (removable or painted) at the leading edge.
4 All transparencies MUST be loaded with the removable or
painted stripe side (dull side) DOWN in the tray. Immediate jams
and machine damage are likely to occur if incorrectly loaded.
5 Fan the stacks before loading for optimum feeding performance.
6 From the Paper Tray (Bypass) screen, select Paper/
Transparency mode for all 11" Removable Stripe Transparencies.
For 11" Painted Stripe Transparencies, select Transparency
Interleave mode to provide the best feeding reliability.
7 To run 11 x 17" transparencies, select the Opaque Film/17"
Transp. mode from the Paper Tray (Bypass) screen. Remove
each sheet as it exits the copier/printer to prevent curl from
forming at the trailing edge.
USAGE GUIDELINES
19
Seite drucken