Xerox 3100MFPX - Phaser B/W Laser Anleitung Handbuch - Seite 30

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Drucker-Zubehör Xerox 3100MFPX - Phaser B/W Laser herunter. Xerox 3100MFPX - Phaser B/W Laser 36 Seiten. Dect phone installation instructions
Auch für Xerox 3100MFPX - Phaser B/W Laser: Benutzerhandbuch (2 seiten), Handbuch für Auswerter (12 seiten), Einbauanleitung (2 seiten)

Seite drucken

Xerox 3100MFPX - Phaser B/W Laser Anleitung Handbuch

ETTINGS

On the multifunction terminal:

Put the terminal in registration mode:

891 - ADVANCED FCT / DECT /

On the machine, press

the keypad and confirm with OK.

The machine starts searching for the hand-

set.

During the registration process (up to

one minute), the LCD screen displays

HANDSET

REGISTRATION

message disappears once registration is

complete.

If the registration process fails (for

example, the handset left the

registration mode too soon), the

machine emits a 3-beep signal. In

this case, repeat the procedure from

step 1.

The new handset and the base are mutually

searching for each other. The registration

may take several seconds.

Once the handset is registered, the handset

automatically exits the registration mode and

lets you know the registration is done.

You can also set your base to the

registration mode using a handset

already registered by selecting the

Registration function in the menu

SETTINGS/ADVENCED SET./SET

BASE.

, enter 891 using

The

Modifying the terminal

preference

This function enables you to specify which

base will be used by your handset to make

calls (if your handset is registered to several

bases).

On the navigator key

until the SETTINGS screen is displayed,

press OK to confirm.

Select ADVANCED SET.. Press Valid.

Select SET HANDSET. Press Valid.

Select BASE PRIORITY using

Press Valid.

An information screen presents the current

base preference for your handset.

•

To keep the preference, press

Valid.

•

To modify the preference, press

Edit

A list provides the bases among which you

can choose the preferred base to which you

want your handset to be registered. With the

automatic mode you are not required to

specify the preference.

Select the base preference using

Press Valid.

To exit the menu, press the red key

, press