Calex Thermosight GL Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Calex Thermosight GL herunter. Calex Thermosight GL 19 Seiten. Hand held infrared pyrometer
Seite drucken3.2. Setting up the instrument
The instrument is powered by a 9 V Alcaline-Manganese battery (IEC 6LR61) or
a 9 V rechargeable battery with the same dimensions, fitted into the handle. To
replace the battery, first remove the screw in the batterycover and then pull out
the battery cap. Fit the battery clip to the terminals on the battery, ensuring the
polarities are correctly matched. Replace the battery cap and the screw. The
pyrometer is now ready to use.
To prevent data losses, the battery change should only be done if the
instrument is not working.
When using a rechargeable battery, it can be recharged via the socket for the
battery charger, being available as accessory.
The typical changing current is 10 mA.
When the battery power is low the
The instrument can still be operated for a short time. If the battery power is
too low for the instrument to operate correctly, then it will switch off
automatically. For saving battery life it is advisable to use the laser pilot light
only temporarily for aiming at the target and then turning it off.
9 Volt
Caution!
Do not use the battery chargerif a non-
rechargeable battery is fitted!
+ -
symbol will flash on the display.
6