Xerox Versant 4100 Press Handbuch - Seite 29

Blättern Sie online oder laden Sie pdf Handbuch für Drucker-Zubehör Xerox Versant 4100 Press herunter. Xerox Versant 4100 Press 44 Seiten. Customized envelope feeder

Seite drucken
 

REP 5.0 Separator O-Ring Adjustments for Different Media

Overview
Advance the Separator Assembly O-Rings when they show wear. Follow the steps below to access the
O-Rings on the Separator:
1.
Turn the power switch to the Off position and remove the Feeder power cord from the
power source.
2.
Move the Feeder away from the Versant Bypass Tray.
3.
Engage the J-Hook to lock the Discharge Assembly of the Feeder in the UP position.
4.
Remove the Separator Assembly from the Separator Bracket by pushing down on the
Separator Barrel while lifting up on the Separator Adjustment Knob (Repeat this process
when re-installing the Separator Assembly onto the Separator Bracket).
5.
Move the O-Ring assemblies along the shaft to change the O-Ring orientation on the
Nudger.
 
NOTE: As an alternative, you can use a screwdriver to separate the O-rings without removing the
Separator Assembly. BE SURE THE UNIT IS POWERED OFF.
Xerox Customized Envelope Feeder – Problem Solving Guide
   
 
4-11