Xerox CSX 2000 Referenzhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Software Xerox CSX 2000 herunter. Xerox CSX 2000 13 Seiten. Xerox csx 2000 servers:
Auch für Xerox CSX 2000: Ergänzendes Handbuch (20 seiten), Anmerkungen zur Veröffentlichung (13 seiten)

Seite drucken

X E R O X D O C U C O L O R 2 0 0 0 S E R I E S

When imposing a perfect square image, i.e. 5x5 or 6x6, the outcome of HTT or HTH

may be opposite of the desired outcome. The system can not distinguish if the

image is " long edge" or " short edge" .

Regular clean up of the storage and image disks is strongly recommended to avoid

future problems with disk fragmentation, which may cause slow downs in overall

system performance. Procedures for clean up are included in the operator' s

manual.

In some instances, the RIP will fail to process a job with no alerts or GUI messages.

This can happen with any particular problems with the file being processed. To

obtain specific job processing information, the operator should use the " Job History"

menu selection by pressing the mouse right button key in the storage folder.

There are no constraints on the Macintosh or Windows 98 regarding the

paperweight and the number of pages that can be stapled. The PPD allows the

options to be selected, and once the job arrives at the DFE it fails. If the staple

position is specified from the PPD and the job fails in the Process queue, evaluate if

the job violates any of the constraints associated with the HCSS.

Landscape jobs have Portrait Staple Options available in the PPD and Portrait jobs

have Landscape Staple Options available in the PPD. Sending a job with the

opposite image orientation and Staple position option selected causes the job to be

printed and stapled correctly, but the image is cropped. The job image orientation

should dictate which staple positions options are selected. For example, if the

image orientation is Portrait, only Portrait staple positions should be selected (within

Page Setup, Paper Size).

High Capacity Stacker (HCS) and the High Capacity Stacker Stapler (HCSS)

modules are not installable options on the PPD at this time. These options will

always be available in the PPD although the finishing device is not installed.

A maximum of five client station users can concurrently mount the shared volume of

the DFE.

PC Font Downloading requires a utility purchased from a third party vendor.

Banner page for Novell is not supported.

Job batching is limited to 4000 cumulative original pages in a " batched set of jobs" .

Pantone Blends consisting of two or more Pantone colors will fail in the Process

Queue.

Use of the Admin page with slip-sheets and stapling is not supported.

Imposition using "Fit to Page" with Admin page causes Admin page image scaling to

change.

Paper attributes settings in the default virtual printers are not always retained.

Transparencies are always delivered to the HCSS top tray.

Mixed paper size jobs (including those created in applications) are not supported.

March 28, 2002

C U S T O M E R E X P E C T A T I O N S D O C U M E N T

V e r s i o n 2 . 0