INDEX
Set Profiles command CM 6-2, CM 6-3
Set Scheduling Policy command PJ 3-12
Set Status Message command CM 2-12
Set Time command CM 7-1
Set Tray Purge|No Purge CM 5-8
Set Tray <n> Tray <m> command CM 5-7
Set Tray command PJ 4-1, PJ 4-4, DC 7-6,
CM 5-4, CM 5-5
Set Tray Default command CM 5-5
Set tray from virtual printer media CM 5-8
Set Virtual Printer Flags command PJ 2-8
setbscolor TG 6-5
SetCacheDevice operator PD 1-32
setcmykcolor TG 6-5
setcolorscreen TG 6-4–TG 6-5
setfileposition operator PD 1-21
setflat TG 6-6
setflat operator PD 1-25
setgray TG 6-5
setgray operator PD 1-28
setlinewidth TG 6-6
setlinewidth operator PD 1-23, PD 1-24
setpagedevice error
DOS xcat DC 6-15
SunOS/Solaris formmerge DC 6-19
setpagedevice operator
calls, multiple PJ 5-2
caution PJ 5-2
command PJ 5-12
example PJ 5-4
media
requests PJ 4-2
selection PJ 4-6
MultiSet feature PJ 5-2
setrgbcolor TG 6-5
setrgbcolor call DC 8-6
setscreen TG 6-4–TG 6-5
setscreen operator PD 1-32
setting
default media CM 5-7
dynamic media PJ 4-5–PJ 4-6
feeder tray attributes CM 5-4
imager parameters CM 5-29
imager parameters, PCL CM 5-33
multiple copies PJ 5-11
printer options CM 5-29
CM = Guide to Configuring and Managing the System
IS = IPDS Solutions Guide
Maintenance
SJ = Guide to Submitting Jobs from the Client
INDEX-32
DC = Decomposition Service and Tools Guide
PD = Guide to Using PDL
PJ = Guide to Managing Print Jobs
profiles CM 6-2
static media PJ 4-1
Setting IPDS Options PJ 8-1
setting stacker groups CM 5-10
settransfer TG 6-5
shading
adding color IS 5-9
limitations IS 9-1
Macintosh LaserWriter driver 7.x SJ 4-10
shared resource content files, naming PJ 6-2
shared space IP 6-19, IP 6-20–IP 6-23
shortcuts, command CM 1-1
Show Default Color Calibration command
CM 15-12
Show Default Media command CM 5-4
Show Document Attributes command PJ
1-30
Show Host ID CM 2-13
Show Host ID command CM 2-13
Show Imager Parameters command CM
5-30
Show IPDS Tracing command CM 2-13
Show IPDS Virtual Printer command PJ 2-10
Show License Status command CM 2-15,
CM 2-17
Show Log command DC 7-7, DC D1-1, CM
9-10
Show PCL Imager Parameters command
CM 5-33
Show Profiles command CM 6-1
Show Scheduling Policy command PJ 3-13
Show Status command DC 7-8, DC D1-7,
CM 8-2
Show Time command CM 7-1
showpage operator DC 8-2
shutting down the system CM 3-3
simplex output PD 2-6
simplex printing
specifying
Windows NT 4.0 (transparent) SJ
5-17
single job, removing referenced files PJ 6-7
single-use referenced content files PJ 6-2
site
selection, Xerox responsibilities IP 4-2
Sixth Sense IP 1-14, IP B-2, SO 1-6
SO = System Overview Guide
IP = Installation Planning Guide
RM -Guide to Performing Routine
TG = Troubleshooting Guide
Master Index
Seite drucken