Xerox DocuSP 3.x Handbuch "Erste Schritte - Seite 22

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Software Xerox DocuSP 3.x herunter. Xerox DocuSP 3.x 27 Seiten. Document services platform series

Seite drucken

DOCUSP 3.x

W-7: AppleTalk Gateway installation worksheet

If the customer has purchased the AppleTalk Connectivity —

Apple PAP gateway, fill out this worksheet.

Data

Elements

AppleTalk Phase Type

AppleTalk zone name

W-7 data element definitions

AppleTalk Phase Type: There are three AppleTalk Phase

Types:

Phase 1 (non-extended network) is a single physical network

that can support up to 254 mode addresses (devices).

There is only one network number and one zone assigned to

the network.

Phase 1 is not configured as Phase 1, but should follow the

Transition mode install procedure. This is done so that

Macintosh Transparent Printing can be enabled.

Phase 2 (extended network) is a network in which there are

two or more network numbers assigned to a single physical

network. Each network number on an extended network is

an addressing channel that can support 253 devices and

only one zone name. Phase 2 routers can be configured to

support non-extended networks.

Transition mode (Phase 2 Transition) is a way of configuring

a Phase 2 router so that it can function on an internet that

includes Phase 1 routers. Since Phase 1 routers cannot

recognize multiple network numbers or multiple zones on a

network, a Phase 2 router in the transition mode is

deliberately limited to addressing only 253 devices.

You can determine which EtherTalk phase types is running by

completing the following steps:

1. Select the Control panel from the Apple Menu Icon (upper

left corner of the screen on a Macintosh).

2. Double-click the Network icon.

3. The icon describes the phase type:

a. An icon showing two single opposing arrows represents

EtherTalk 1.0 (Phase 1).

b. An icon showing two double opposing arrows represents

EtherTalk 2.0 (Phase 2).

Should the EtherTalk 2.0 icon appear, double-click on it and see

if an Internet router is found. If one is found, a panel appears

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING READY FOR THE DOCUSP INSTALLATION

Customer

Value