Xerox DocuSP 4.2 Differences Handbuch "Erste Schritte - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Software Xerox DocuSP 4.2 Differences herunter. Xerox DocuSP 4.2 Differences 34 Seiten. Docusp getting started
Auch für Xerox DocuSP 4.2 Differences: Handbuch (34 seiten)

Seite drucken

o Using the lp utilities for Solaris (using lp.pdf):

Contains the syntax and commands for using

the Unix lp print command to submit jobs to the

DocuSP controller.

o Using the lpr utilities for DOS and UNIX (using

lpr.pdf): Contains the syntax and commands for

using the command line lpr from either UNIX or

DOS to submit jobs to the DocuSP controller.

♦ Product specific folder(s): One or more product specific

folders are available on the user guide CD ROM. The

folders contain documents such as the printer Operator

Guide, Installation Planning Guides for electrical and

space requirements, plus additional documents as

necessary for the smooth operation of your printer. Access

the folder that matches the printer type you are using.

♦ DocuSP Online Help: The DocuSP software contains an

on-line Help system accessed from the various Help

buttons and pull-down menus on the DocuSP interface.

NOTE: The DocuSP Online Help has not been updated for

DocuSP 4.2. Therefore, the Online Help screens will be

labeled DocuSP 4.1 Online Help. Additional features not

documented in the Online Help are documented in the

DocuSP 4.1 to 4.2 Differences document.

In addition, a PDF version of the content of the on-line

Help is available on the DocuSP by accessing the Help

pull-down menu on the DocuSP user interface (UI). To

print on-line:

1. On the DocuSP UI, select the Help pull-down menu

and select Print Help Documentation.

2. Select a queue from the pull-down menu, and

select OK.

3. Send the documentation to a hold queue in order to

program the job properties, or send the job to a

queue with the following job properties set as

overrides:

−

Sides imaged = 2-sided

−

Finishing = none

−

Paper stock = 8 1/2 x 11 or A4; drilled if the

document is to be placed in a binder.

4. In Job Manager, locate the job and program the job

properties. Then, release the job to print.