Xerox Nuvera 100 Benutzerhandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Software Xerox Nuvera 100 herunter. Xerox Nuvera 100 40 Seiten. Production system
Auch für Xerox Nuvera 100: Spezifikationsblatt (2 seiten), Merkmale Handbuch (34 seiten), Planungshandbuch (22 seiten), Betriebshandbuch (34 seiten), Referenzhandbuch (2 seiten), Planungshandbuch (20 seiten), Referenzhandbuch (42 seiten), Kurzreferenz (2 seiten), Handbuch installieren (2 seiten), Ergänzendes Handbuch (48 seiten), Planungshandbuch (38 seiten), Planungshandbuch (16 seiten), Referenzhandbuch (2 seiten), Spezifikationen (2 seiten), Tipps und Tricks Handbuch (18 seiten), Tipps und Tricks Handbuch (18 seiten), Handbuch "Erste Schritte (26 seiten), Handbuch "Erste Schritte (30 seiten)

Xerox Nuvera 100 Benutzerhandbuch
MICR fonts

MICR application resources

Security features

2-20
New MICR implementation
1. Install the Xerox MICR fonts on the host AFP system.
2. Use the X0AE13 and X0AT13 fonts in your
applications.
3. Refer to the code page and character set descriptions
in the IBM manuals and Xerox supplements.
4. Ensure that the MICR strings are contiguous. For
example, if you have a string of MICR font text and
you insert a non-MICR font in the middle of that string,
the MICR font spacing is not accurate when printed.
Custom MICR font application
1. Install Xerox MICR fonts on the host AFP system.
2. Substitute the Xerox MICR fonts for your existing
custom MICR fonts.
3. Modify the code page, if necessary.
4. Use the unchanged Xerox MICR character set to
ensure integrity of the Xerox Check Performance
Guarantee. (Refer to "The MICR Guarantee," in
chapter 4 of this guide.)
Existing Xerox MICR font application
1. Install Xerox MICR fonts on the host AFP system.
2. Remove the ! spacing from text strings. This character
was required for correct spacing in previous MICR
technology. However, the new set of MICR fonts uses
relative metric technology that inserts blank pel
spacing automatically after every two characters.
3. Code a PageDef to select the E13B font for MICR
strings.
In order to print your MICR documents on a DocuPrint 75
MX, you must have all of the resources used in the
application resident on your host system. You must also
have the Xerox AFP MICR fonts installed on your system.
(Refer to Installing Xerox AFP MICR Fonts for DocuPrint
MICR IPS Printers, delivered with your MICR system.)
PSF has a security feature that allows you to download
MICR fonts to a MICR printer only. The Xerox DocuPrint
MICR printers also support this feature. Refer to "Security"
in chapter 4 of this guide for further information on the
DocuPrint 75 MX security features.
MICR User Guide