Xerox WorkCentre M118i Handbuch zur Schnelleinrichtung - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Software Xerox WorkCentre M118i herunter. Xerox WorkCentre M118i 5 Seiten. Copy/print/fax/email
Auch für Xerox WorkCentre M118i: Benutzerhandbuch (2 seiten), Modul-Handbuch (2 seiten), Schnellinstallationskarte (2 seiten), Software-Handbuch (47 seiten), Handbuch zur Schnelleinrichtung (5 seiten), Handbuch (28 seiten), Handbuch zur Standinstallation (4 seiten), Installationshandbuch (2 seiten), Installationshandbuch (2 seiten), Installationshandbuch (2 seiten), Installationshandbuch (2 seiten), Installationshandbuch (2 seiten), Installationshandbuch (1 seiten), Installationshandbuch (1 seiten), Handbuch "Erste Schritte (25 seiten), Handbuch für Auswerter (12 seiten), Service-Handbuch (12 seiten)

Network Setup Using a Static IP Address

When the machine is powered on, it automatically uses DHCP to obtain its network configuration. To use a

static IP address, DHCP must be turned off and the IP address, gateway address, subnet mask, and

DNS Server address must be entered manually.

Pre-requisites for Using a Static IP Address

Before you begin, obtain the following information from your network administrator:

IP Address:

Gateway Address:

Subnet Mask:

DNS Server Address:

Connecting the Machine Using a Static IP Address

Turn on the machine.

When the machine is Ready, press the Log In/Out button.

Press the Select button below the display to select

Use the numeric keypad to enter the Password. The default password is 11111.

Press the Select button to select Confirm.

Turn DHCP Off

Press the Select button to highlight

Press the the Enter button to select Network/Port.

Press the Select button until you see

Select

Get IP

Address, and then press the Enter button.

Select Manual, and then press the Enter button.

Press the Exit button.

Set the IP Address

Press the Select button until you see

If there is an incorrect IP address in the field, press the Clear button to delete the address.

Use the numeric key pad to enter the first number of the IP address, and then press the Right Arrow button

to move to the next field.

Repeat Step 3 to enter the remaining numbers.

Press the Enter button to accept the address.

Press the Exit button.

__________ . __________ . __________ . __________

System

Settings, and then press the Enter button.

TCP/IP Settings

on the display, and then press the Enter button.

IP Address

on the display,, and then press the Enter button.

Xerox WorkCentre M118/M118i

Network Setup Using a Static IP Address

Settings.