T
O PRINT THE
T
O PRINT THE
System
Copyright 2005 © Electronics for Imaging, Inc.
Customer Release Notes
Fiery EXP4110 version 1.0
This document contains information about the Fiery EXP4110 version 1.0. Before using
the Fiery EXP4110 with version 1.0, make copies of these Customer Release Notes and the
Quick Connect Guide and distribute them to all users.
This document uses the term "Fiery EXP4110" to refer to the Fiery EXP4110.
N
:
OTE
The term "printer" is used to refer to the Xerox 4110 printer.
Before printing to the Fiery EXP4110, make sure system software version 1.0 is installed
on the Fiery EXP4110. To determine this, print a copy of the Configuration page.
C
ONFIGURATION PAGE FROM
1 In Command WorkStation, choose Print Pages from the Server menu.
2 Click Configuration.
3 Click Print.
C
ONFIGURATION PAGE FROM THE
1 Make sure the information screen on the Fiery EXP4110 Control Panel reads Idle.
If Printing or RIPping appears, the Fiery EXP4110 is processing. You must wait until
the system finishes and reaches the Idle state.
2 At the Fiery EXP4110 Control Panel, press the Menu button to access the Functions menu.
3 Select Print Pages.
4 Choose Configuration.
You must also install user software version 1.0 on client computers. For instructions,
see Printing from Windows and Printing from Mac OS.
Font archiving
You cannot archive fonts using the Fiery EXP4110 Control Panel. A disk error occurs, and
the fonts are not backed up. As a workaround, use Command WorkStation to archive fonts.
Trying to reconnect message
If the message "Trying to connect" displays on the Fiery EXP4110 Control Panel, shut down
the Fiery EXP41100 and the printer, wait 10 seconds, and then turn both devices back on.
Recycling power on the printer
Any time you recycle power on the printer, you must also recycle power on the
Fiery EXP4110.
C
W
S
OMMAND
ORK
TATION
F
EXP4110 C
IERY
ONTROL
P
ANEL
Part Number: 45051581
23 September 2005
Seite drucken