Xerox Phaser EX7750 Schnellstart-Handbuch - Seite 23
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Druck-Server Xerox Phaser EX7750 herunter. Xerox Phaser EX7750 28 Seiten. Phaser with efi fiery network color server
Auch für Xerox Phaser EX7750: Detaillierte Spezifikationen (4 seiten), Setup-Handbuch (2 seiten)
Seite drucken
15 Preparing to print
Setting up the EX7750
Setup configures the EX7750 to communicate with other devices and manage print
jobs. You must perform Setup the first time you turn on the EX7750 after new system
software is loaded, or any time Server software is reinstalled. You must also perform
Setup after using the Restore/Update CD. Initial Setup must be performed at the
EX7750 Control Panel or from the FACI, but further changes to Setup can be
performed remotely from WebSetup on WebTools.
Perform the following Setup options in the order listed:
•
—specifies system options.
Server Setup
•
—specifies all the active network systems that transmit print jobs to
Network Setup
the EX7750.
•
—specifies how print jobs and queues are managed.
Printer Setup
This is the minimum setup required to enable your EX7750 to begin printing.
N
:
OTE
To configure network settings in Setup, you need a live network connection so the
EX7750 can query the network for zones, servers, and server-based queues.
To perform Setup from the Control Panel, select one menu after another and enter
information about your EX7750 and your network and printing environment. In each
Setup screen, the last line of the display shows the name of the current Setup menu.
Most of the menus you see are displayed on the Control Panel Map as a flow chart that
you can print from the Control Panel.
For an introduction to EX7750 Setup and detailed instructions on setting up the
EX7750 from the Control Panel and from a Windows computer using Command
WorkStation or WebSetup, see the
Configuration
Guide.