Clarity XLCgo Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Handapparate Clarity XLCgo herunter. Clarity XLCgo 19 Seiten.

Pairing XLCgo with Clarity DECT devices

XLCgo pairs with the following Clarity DECT devices as an expandable speakerphone: XLC8,

XLC7BT, XLC3.4+ and XLC4.

1. Step one: Enter pairing mode on DECT base

• Press and hold the [FIND] key on base for 5 seconds, until the visual ringer starts flashing

2. Step two: Enter pairing mode on XLCgo

• Turn on XLCgo. Place it in the charging cradle and press & hold [PAIR] key (around 5

seconds) until you hear "Start pairing with base station" and DECT indicator flashes

green and red alternately. Then XLCgo enters DECT pairing mode.

3. Step three: Connection to the DECT device

• XLCgo is connected with the device automatically as soon as they are paired. When

connected, you hear voice guidance "Base station connected". If not, it announces

"registration failed."

Reconnecting Your XLCgo

1. If XLCgo has been turned off, it will reconnect to the phone automatically after turning it

on; if not, press reconnect on the phone.

2. If the phone has been powered off and XLCgo is then disconnected, reconnect it via the

phone's menu when the phone is on again. Or, turn XLCgo off and then back on.