Direct Supply Panacea Air Overlay Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medizinische Ausrüstung Direct Supply Panacea Air Overlay herunter. Direct Supply Panacea Air Overlay 16 Seiten.
Seite drucken
Product Description & Specifications
Product Description
Indications
for Use:
Air Cells:
Overlay Height:
Overlay
Placement:
Pressure
Management:
Control Unit
Power on/off
switch:
*
Firmness dial
*Not available on Panacea Air Overlay with non-adjustable pump
Product Specifications
Certificates and
Fire Ratings
Control Unit
Surface Sizes
•
Check the weight capacity of the bed to make sure both the mattress and bed
are capable of supporting additional weight
Operating Mode
4
The Direct Supply Panacea Air Overlay is a flotation therapy
device that provides pressure management to assist in the
prevention and treatment of up to Stage IV pressure ulcers.
The alternating pressure mode provided with the Direct Supply
Panacea Air Overlay is indicated for use as a preventive tool
against further complications associated with critically ill
residents or immobility.
130 air-filled polyurethane air bubbles/cells are divided into two
separate, alternating pressure zones. These air cells inflate to a
height of 2
⁄
" for Air Overlay and 3
1
2
Air Overlay
Air Overlay Deluxe The total pressure-management surface
The overlay should be placed directly on an existing healthcare
mattress of an appropriate size.
This overlay system is designed to provide pressure
management for the prevention and treatment of up to Stage IV
pressure ulcers.
Powers the control unit on and off.
:
A djusts the pressure within the system.
Meets California Technical Bulletin 117 (CA 117)
UL 1431 (115V 60Hz)
CE (230V 50Hz)
120 V, 60 Hertz
Air Overlay
Air Overlay Deluxe
Panacea Air Overlay – Alternating Pressure
Provides 10 minute loading and unloading cycle designed to
maintain low interface pressures throughout the overlay, to
redistribute peak interface pressures during the cycle.
⁄
" for Air Overlay Deluxe.
3
4
The total pressure-management surface
height is 2
⁄
".
1
2
height is 3
⁄
".
3
4
35"W x 2
⁄
"H x 79"L, 250 lb weight capacity
1
2
35"W x 3
⁄
"H x 79"L
3
4