Direct Supply Panacea Transport dolly Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medizinische Ausrüstung Direct Supply Panacea Transport dolly herunter. Direct Supply Panacea Transport dolly 8 Seiten. For panacea 3000, 3250 and 3500 beds
Seite drucken
Carrier Arm
Brackets
4
Operation
Required Tools
(2)
⁄
" wrench
9
16
NOTE: Before operating Transport Dolly: headboards/
footboards, siderails and assist rails must be removed.
Also, the bed should be raised to its full height.
Attaching Transport Dolly
1. Push the carrier arm brackets into the headboard/
footboard mounting tubes. Lock snap buttons
(located on the brackets) into the center holes in the
mounting tubes.
NOTE: It is important to push the arm in from both
sides to ensure even insertion.
Mounting
Tubes
2. Repeat process for the other end of the bed.
Mounting
Tubes
3. Using the handset, "lower" bed completely to raise
bed casters off floor. Manually stabilize the bed as the
casters are raised.
4. Unplug the electrical power cord.