Direct Supply Panacea Tilt-and-Recline Chair Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wheelchair Direct Supply Panacea Tilt-and-Recline Chair herunter. Direct Supply Panacea Tilt-and-Recline Chair 20 Seiten. Weight capacity 350 lbs.

Seite drucken

Legrest & Foot Plate

To adjust the legrest angle:

• Pull the release lever located under the seat on the front left side (Figure 11).

• Raise or lower the legrest to the desired position. During this process, the caregiver

should also use his or her other hand to help guide the legrest into place.

• Release the lever to lock in place.

To adjust the height of the foot plate (if the chair is equipped with a footrest):

• Pull the release pin located directly underneath the legrest (Figure 12).

• Pull the foot plate up or down until the desired position is achieved. Height adjustment is

in 1" increments.

• Release the pin to lock in place.

• WARNING: Do not use the legrest or foot plate as a platform. Standing on, exerting

pressure or stepping on the legrest or foot plate could cause the chair to tip or may cause

damage to the chair or personal injury.

• WARNING: When transferring into or out of the chair, make sure the foot plate is folded

in the upward position and the legrest is in the stored position.

Figure 11

NOTE: The foot plate is hinged and can

be folded up or down if needed.

Figure 12

1-800-634-7328

DirectSupply.com