Direct Supply Panacea Tilt-and-Recline Chair Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wheelchair Direct Supply Panacea Tilt-and-Recline Chair herunter. Direct Supply Panacea Tilt-and-Recline Chair 20 Seiten. Weight capacity 350 lbs.

Seite drucken

Operating Instructions

Tilt Operation

The seat tilt angle can be adjusted from 0 to -35 degrees. In order to tilt the chair:

• Locate the tilt mechanism handle. The handle is located at the rear of the chair, on the right push

bar, marked with a "TILT" label (Figure 3).

• Squeeze the handle and tilt the chair back or forward to the desired angle.

• When the desired angle has been achieved, release the handle to lock the position in place.

• Ensure the legrest is extended, and to the desired comfort level.

Figure 3

• WARNING: The caregiver should use and familiarize himself or herself with the handle

mechanism prior to operating the chair.

• WARNING: The caregiver should assess the user's abilities, weight and physical condition to

determine the sufficient degree of tilt. An improper tilt degree could result in a tipping of the chair

and/or the user sliding or falling off the chair.

• WARNING: The gas cylinders must be operational before using the chair. Do not operate the tilt

mechanism if the gas cylinders are not operational.

• WARNING: Ensure the user's arms and hands are inside the chair frame and clear of all pinch

points before adjusting the tilt angle.