Alderon Industries VertiMAC VM13 Series Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter Alderon Industries VertiMAC VM13 Series herunter. Alderon Industries VertiMAC VM13 Series 20 Seiten. Pump switch

Seite drucken

VertiMAC™ Pump Switch - USER GUIDE

Mounting Pump Switch (continued)

STEP 3: MOUNTING TO PIPE

Attach the pipe clamp to pipe at the approximate mounting level

and tighten using the fastener nut. Make sure to keep all cables

and wires away from the float while mounting.

Note: Do not completely secure pipe clamp and VertiMAC™

pump switch to the pipe until the off level has been determined.

See step 4 final mounting location on page 9.

CAUTION: The VertiMAC™ pump switch MUST be mounted in

the vertical position. Mounting the pump switch at an angle will

result in the switch not functioning properly. Perform a quick test

by lifting the float up and down to ensure the switch is working.

8 | Alderon Industries™ - Leading Edge Control Products