eControls RT2 Handbuch für Hausbesitzer und Installateure - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Hausbesitzer und Installateure für Controller eControls RT2 herunter. eControls RT2 12 Seiten. Wireless whf control
Auch für eControls RT2: Handbuch für Benutzer und Installateure (8 seiten)

Seite drucken
4)
Install Batteries and Set Installer Options
Homeowner - The following options have been set by the installer. Changing options without contacting
!
your installer could result in the fan not operating correctly or damage to the control.
Installer - Ensure the number of fan speeds is set correctly before operating the WHF. Failure to do so
!
could damage the FC3J control board.
Option
Description
01
Set WHF Speeds
02
High Speed Start
INSTALL BATTERIES
Slide the battery cover down.
Place the batteries in the RT2,
making sure the polarity is correct.
Slide the battery cover up. The
RT2 is now ready for operation.
ACCESS INSTALLER OPTIONS
Outdoors
Indoors
o
F
Cool
Linked
Set To
Econo
Cooling
Menu
OFF
3
INSTALLATION
Access the Installer Options by
pressing and holding the
MENU key for about 7 seconds
until Option 01 is displayed.
3
Tag
Selections
1, 2 or 3
SPd
HSS
Off or On
01 Set the Fan Speeds
Select 1, 2 or 3 Speed
Option
Option
Next
Enter
Use the DOWN
Use the UP key
key to select 1-
to select 2-speed.
speed.
Press the NEXT key to go to the next option or press
ENTER to save the selection.
02 High Speed Start Up
For some installations, a low speed start up may not be
adequate to fully open the damper. When this option is
set to ON, the WHF will start up in high speed and after
about 10 seconds will return to the low speed setting.
Option
Enter
Use the DOWN key to
select OFF.
Press the ENTER to save the selection.
10
Factory
2
Off
Option
Next
Enter
Next
Enter
Use the UP key
to select 3-speed.
Option
Enter
Use the UP key to select
ON.