Direct Voltage 5 Axis Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Adapter Direct Voltage 5 Axis herunter. Direct Voltage 5 Axis 12 Seiten. Breakout board

5 Axis Breakout Board Interface Adapter

1 Introduction and Features

The latest upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase

stepper driver controller, such as M542, M542H, MA860H, 2M542, 2M982, DM542(A),

DM860(A) etc. single axis stepper driver controller series. With this 5 axis breakout board, any

1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3,

EMC2, KCAM4, etc.



Maximum support 5-axis stepper motor driver controllers



Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.



USB power supply and peripherals powered phase are separated to protect computer security.



All the signals are opto-isolated which can protect your computer security.



5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.



Wide input voltage range: 12-24V, and with anti-reverse function.



One relay output control interface, accessed by the spindle motor or the air pump, water

pump, etc.



Output 0-10V analog voltage for inverter to control the spindle speed.

Input Power

Compatible Stepper Motor Driver

Driver type

Net/Total Weight

Dimensions

Electrical properties(ambient temperature Tj = 25︒C)

Direct Voltage LLC

USB port to directly get power from PC and

12-24V power supply(optional)

Max 5 2-phase Microstep controllers

Pulse and Direction signal control

Approx 75g

90 * 70 * 20mm (L*W*H)