Yamaha Arius YDP-160 Benutzerhandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha Arius YDP-160 herunter. Yamaha Arius YDP-160 44 Seiten. Yamaha digital piano user's manual
Auch für Yamaha Arius YDP-160: Midi-Datenformat (6 seiten), Kurzbedienungsanleitung (2 seiten), Benutzerhandbuch (44 seiten), Handbuch (44 seiten), (Dänisch) Benutzerhandbuch (44 seiten)

Seite drucken

Recording your Performance

Your digital piano's recording function enables you to record your performance of one song.

The recorded performance is called the "user song."

Follow the steps below to record and play back your performance.

Audio recording and data recording

Cassette tape recordings use a different data format than this instrument. Cassette

tapes record audio signals. On the other hand, this instrument records information

about the notes and voices being played and about the timing and tempo of those

notes. It does not record audio signals. When you play back a recorded performance

on this instrument, its internal tone generator reproduces the sound according to

the recorded information.

CAUTION

Be careful not to erase the recorded data:

After you record a performance on this instrument, the [PLAY] button indicator lights

up. When this indicator remains on, recording another performance will erase the

recorded data.

Procedure

Select a voice and other settings for the recording.

While holding down the

160) or C1–F1 (YDP-140) keys to select the desired voice(s). (See page 19.)

If you desire, you can select other settings, such as the reverb setting.

Use the

[MASTER VOLUME]

tening level. You can also use the

ume level during playback.

Engage Record mode.

Press the

[REC]

The

[REC]

starts to ﬂash.)

Press the

[REC]

Start recording.

Recording starts as soon as you play the keyboard.

Alternatively, press the

The

[REC]

ﬂashes at the current tempo.

Stop recording.

Press the

[REC]

CAUTION

Do not turn off the power to this instrument while it is recording the data in its internal

memory (that is, while the [REC] and [PLAY] button indicators are ﬂashing). Otherwise,

all recorded data, including the data being recorded, will be lost.

Owner's Manual

YDP-160/140

[PIANO/VOICE]

control to adjust the volume to a comfortable lis-

[MASTER VOLUME]

button.

button indicator ﬂashes. (It may take a moment before the indicator

button again if you wish to cancel Record mode.

button to start recording.

[PLAY]

button indicator lights up steadily, and the

button.

button, press one of the C1–A1 (YDP-

control to adjust the vol-

button indicator

[PLAY]

The user song is saved as a

Standard MIDI ﬁle (SMF).

(page 32)

To transfer and play the user

song on another device, you

must have Musicsoft Down-

loader (page 32) installed on

your computer.

You cannot engage Record mode

while a demo song is playing.

Recording capacity

"Recording capacity" is the

maximum amount of perfor-

mance data that you can

record. This instrument's

recording capacity is 100 KB

(approximately 11,000 notes).

Changing the settings for the

recorded user song

If you wish to change the voice

of the user song, before press-

ing the [REC] button, select a

different voice. Then, press the

[REC] button to engage Record

mode. Without playing the key-

board, press the [REC] button

again to apply the change to the

song. If you wish to change the

tempo, do so after you engage

Record mode.

You can save the recorded user

song to a computer. You can

also load the user song data

from a computer and play it back

on this instrument. (See

page 32.)